Work on right side wing tip, bondo body filler used to fill some areas on bottom side of wingtip to match wing profile more closely. Also filled a couple of “puckers” where the mounting bolts deform the surface of the tip when pulled tight against the wing. I had noticed these puckers on several examples at Oshkosh 2021. See attached pictures. Top side of the tip on right side is not really something that can be fixed with filler. The tip fits close to flush with edge of wing (for height) but is too tall or thick by 3/16”just about 3/4” farther out (spanwise) and this will be hard to fill without looking worse.